MANUAL BOOK CONVEYOR SYSTEM

Didalam melakukan proses design Conveyor Belt system telah disepakati sejumlah standard. Berikut standard-standard yang berlaku dalam conveyor system.

Kami menerima jasa pembuatan conveyor belt, jasa fabrikasi conveyor sistem. Tim kami dilengkapi dengan teknologi conveyor design dengan software-software terkenal seperti Conveyor Calculator, Overland Conveyor serta CAD.

MANUAL BOOK CONVEYOR SYSTEM : ISO (WORLD)

251:2012

Conveyor belts with textile carcass – Widths and lengths

252:2008

Conveyor belts – Ply adhesion between constitutive elements – Test method and requirements

282:1992

Conveyor belts – Sampling

283:2015

Textile conveyor belts – Full thickness tensile strength and elongation – Specifications and method of test

283-1:2001

Textile conveyor belts – Determination of tensile strength, elongation at break and elongation at the reference load

284:2013

Conveyor belts – Electrical conductivity – Specification and test method

340:2013

Conveyor belts – Flame retardation – Laboratory scale flammability – Specifications and test method

432:1989

Ply type conveyor belts – Characteristics of construction

433:2017

Conveyor belts – Marking

505:2018

Conveyor belts – Method for the determination of the tear propagation resistance of textile conveyor belts

583:2007

Textile conveyor belts – Tolerances on total thickness and thickness of covers – Test methods

583-1:2008

Conveyor belts with a textile carcass – Total thickness and thickness of elements – Methods of test

703:2017

Manual Book Conveyor System – Transverse flexibility and troughability – Test method

7623:2015

Steel cord conveyor belts – Cord-to-coating bond test

1120:2013

Conveyor belts – Determination of strength of mechanical fastenings – Static test method

1431:2004

Rubber – Resistance to ozone cracking

1554:1999

Conveyor belts – Drum friction test

2148:1974

Continuous handling equipment – Nomenclature

2230:2002

Rubber products – Guideline for storage

3684:1990

Conveyor belts – Determination of minimum pulley

3870:1976

Conveyor belts (fabric carcass) – Adjustment of take-up device

4195:2012

Conveyor belts – Heat resistance – Requirements and test method

4649:2010

Determination of abrasion resistance

4661-1:1993

Rubber, vulcanized or thermoplastic – Preparation of samples and test pieces – Physical tests

5048:1989

Belt conveyors; calculation of operating power and tensile forces

5284:1986

Conveyor belts – List of equivalent terms

5285:2012

Conveyor belts – Guide to storage and handling

5293:2008

Conveyor belts – Formula for transition distance on three equal length idler rolls

5924:1989

Fire tests – Reaction to fire – Smoke generated by building products (dual-chamber test)

7590:2018

Steel cord conveyor belts – Methods for the determination of total thickness and cover

7622-1:2013

Steel cord conveyor belts – Longitudinal traction test – Part 1: Measurement of elongation

7622-2015

Steel cord conveyor belts – Longitudinal traction test – Part 2: Measurement of tensile strength

7623:2016

Steel cord conveyor belts – Cord-to-coating bond test – Initial test and after thermal treatment

8094:2013

Steel cord conveyor belts – Adhesion strength test of the cover to the core layer

9856:2017

Conveyor belts – Determination of elastic and permanent elongation and calculation of elastic modulus

10247:1990

Conveyor belts – Characteristics of covers – Classification

10357:1989

Conveyor belts – Formula for transition distance on three equal length idler rollers (new method)

12881-1:2008

Conveyor belts – Propane burner test

12881-2:2008

Conveyor belts – Large scale flammability test

12882:2002

Conveyor belts for general use – Electrical and fire safety requirements

13827:2004

Steel cord conveyor belts – Determination of horizontal and vertical position of the steel cords.

14890:2013

Conveyor belts – Specification for conveyor belts of textile construction for general use

14973:2004

Conveyor belts for underground use – Electrical and fire safety requirements

15236-1:2017

Steel cord conveyor belts for general purpose – Requirements

15236-2:2017

Steel-cord conveyor belts – Preferred types

15236-3:2017

Steel-cord conveyor belts – Safety requirements for underground use

16851:2013

Textile conveyor belts – Determination of the endless length

18573:2012

Conveyor belts – Test atmospheres and conditioning

20238:2017 (draft)

Conveyor belt – Testing of drum friction

22721:2010

Textile conveyor belts for underground mining

STANDARD CONVEYOR BELT SYSTEM : DIN (GERMANY)

252

Ply separation strength

284

Electrical conductivity; specifications and test method

340

Laboratory scale flammability characteristics; requirement and test method. Rev. Oct 2013.

505

Method for the determination of the tear propagation resistance of textile conveyor belts

583

Textile conveyor belts; total thickness and thickness of constructional elements

703

Troughability

1120

Determination of strength of mechanical fastenings; static test method. Issue 2013.

1554

Drum friction test

3051

Steel wire ropes – characteristics

7716

Rubber products; requirements for storage, cleaning and maintenance

9856

Determination of elastic and permanent elongation and calculation of elastic modulus

12385

STANDARD CONVEYOR BELT SYSTEM : DIN (GERMANY) Lanjutan

Steel wire ropes

12881-1

Fire simulation flammability testing; propane burner test

12881-2

Fire simulation flammability testing; large scale fire test

12882

Conveyor belts for general use; electrical and flammability safety requirements.

13827

Steel cord conveyor belts; determination of displacement of steel cords

14890

Specification for rubber or plastics covered conveyor belts of textile construction for general use

14973

Conveyor belts for underground use; electrical and fire safety requirements.

15236-3

Steel cord conveyor belts; special safety requirements for underground use

16851

Textile conveyor belts; determination of endless length

16974

Conveyor belts – Indentation rolling resistance – Requirements, testing

20340

Flammability of conveyor belts; specifications and method of test

22100-1

Synthetic materials for underground use; hygiene requirements

22101

Basics for the design of belt conveyors (new version of Dec.2011 superseding the 1982 and 2002 issues)

22102-1

Textile carcass conveyor belts – Requirements

22102-2

Textile carcass conveyor belts – Testing

22102-3

Textile carcass conveyor belts – Vulcanized splices

22103

Fire resistant conveyor belts for coal mining

22104

Antistatic conveyor belts; requirements and testing

22107

Continuous mechanical handling equipment; idler sets for belt conveyors, principal dimensions

22109-1

Single-ply textile carcass conveyor belts for underground use – Requirements

22109-2

Two-ply rubber conveyor belts for underground use – Requirements

22109-4

Two-ply conveyor belts for underground hard coal mining – Requirements

22109-5

Textile conveyor belts for hard coal mining – Marking

22109-6

Textile conveyor belts for hard coal mining – Testing

22110

Dynamic testing of conveyor belt joints

22112

Belt conveyors for underground coal mining

22117

Conveyor belts for coal mining; determination of the limiting oxygen index (LOI)

22118

Textile carcass conveyor belts for use in underground coal mines; fire testing

22120

Scraper rubber for underground coal mining

22121

Textile carcass conveyor belts for coal mining; permanent joints

22123

Indentation rolling resistance of conveyor belts – Requirements, testing (see EN DIN 16974)

22129

Steel cord conveyor belts for underground coal mining

22131

Steel cord conveyor belts

22721

Textile conveyor belts for underground use

22123

Indentation rolling resistance of conveyor belts

28094

Steel cord conveyor belts; adhesion strength test of core to cover layer

53504

Testing of breaking strength and elongation of rubber

53505

Testing of hardness of rubber (Shore A and D)

53507

Testing of tear strength of rubber

53513

Determination of the visco-elastic properties of rubber

53516

Testing of abrasion resistance of rubber

STANDARD CONVEYOR BELT SYSTEM : AS (AUSTRALIA)

1332-2000

Textile conveyor belts

1333-2000

Steel-cord conveyor belts

1334-2019

Testing of conveyor belts

1334.1-2016

Testing of conveyor belts – Determination of length

1334.2-2016

Testing of conveyor belts – Determination of thickness

1334.3-2016

Testing of conveyor belts – Determination of tensile strength and elongation

1334.4-2016

Testing of conveyor belts – Determination of troughability

1334.7-2016

Testing of conveyor belts – Determination of ply adhesion

1334.8-2016

Testing of conveyor belts – Determination of resistance to tear

1334.9-2016

Testing of conveyor belts – Determination of electrical resistance

1334.10-2019

Testing of conveyor belts – Determination of ignitability and flame propagation

1334.11-2016

Testing of conveyor belts – Determination of ignitability and surface temperature subjected to friction

1334.12-2016

Testing of conveyor belts – Determination of combustion propagation

1334.13:2017

Indentation rolling resistance of conveyor belts

3552-2016

Guide to splicing steel cord conveyor belts

4024.3611:2015

Belt conveyors for bulk material handling

4035-2016

Glossary of terms

4042.3610

Conveyors – General safety standard

4076.1-2016

Determination of strength of mechanical fasteners

4606-2012

Fire resistant and antistatic requirements for underground belting

5145

Conveyor belt indentation rolling resistance

STANDARD CONVEYOR BELT SYSTEM : CHINA

GB/T 7984-2001

Textile conveyor belts for general use

GB/T 9770-2001

Steel cord conveyor belts for general use

GB/T 10822-2003

Flame resistant textile conveyor belts for general use

HG/T 3714-2003

Oil resistant conveyor belt

GB/T 20021-2005

Heat resistant conveyor belts

MT 668-2008

Steel cord fire resistant conveyor belting for underground coal mining

MT830-2008

Textile reinforced fire resistant conveyor belts for underground coal mining

STANDARD CONVEYOR BELT SYSTEM : USA

There are no standards for heavy-duty conveyor belts in the US.

Only a few cover grades are determined by the US Rubber Manufacturer’s Association (RMA), which are widely being used.

Officially, the RMA recommendations were replaced by ARPM (Association for Rubber Product Manufacturers) specifications in 2011.